If the plastic Tab is still fitted to the remote control battery please remove it.
Plug the Multi Socket into the Mains power socket
Press the Coding button on the Power strip
The RED LED will start to flash
Press the ALL OFF button on the remote control
The Power strip and the Remote will synchronise on the remote channel chosen.
Button 1 for Socket 1
Button 2 for Socket 2
Button 3 for Socket 3
Button 4 for Socket 4
Press a remote button, and the socket corresponding should switch ON
Press the ALL OFF button and strip should switch OFF
Press a remote button, and the socket corresponding should switch ON
Press another remote button, and the socket corresponding should switch ON
